Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) на платформе Web of Science


  • BUILDING MATERIALS AND PRODUCTS
  • Elastic Self-Adhesive Radiation Protection Materials In Construction
  • UDC 699.887
    doi: 10.33622/0869-7019.2026.01.36-41
    Vasily D. CHERKASOV1, vd-cherkasov@yandex.ru
    Vladimir I. RIMSHIN2,3, v.rimshin@niisf.ru
    Dmitry V. CHERKASOV1, dv-cherkasov@yandex.ru
    1 National Research Ogarev Mordovia State University, ul. Bolshevistkaya, 68, Saransk 430005, Russian Federation
    2 Research Institute of Construction Physics of the Russian Academy of Architecture and Construction Sciences, Lokomotivnyy proezd, 21, Moscow 127238, Russian Federation
    3 National Research Moscow State University of Civil Engineering, Yaroslavskoye shosse, 26, Moscow 129337, Russian Federation
    Abstract. Currently, radiation sources are widely used in various industries. Radiation-protective materials are used to protect against the harmful effects of radiation. Elastic self-adhesive radiation protection coatings have been developed, which can be quickly installed and dismantled. The quality of such materials is greatly influenced by the mode of preparation of a viscous mixture. The article examines the effect of mixing a mixture for the manufacture of radiation-protective coatings on its quality. The mixture is prepared in a mixer with Z-shaped blades. Mixing must be carried out in a preheated mixer to a certain temperature for one hour. As a result of this mixing mode, the filler particles are evenly distributed in the viscous matrix and the material structure is formed. When exposed to ionizing radiation, minor defects form in this structure, which ensures high radiation resistance.
    Keywords: radiation-protective materials, viscous mixture, material structure, mixing of the mixture, mixer, adhesive strength
  • REFERENCES
    1. Kolosova A. S., Sokol'skaya M. K., Vitkalova I. A. et al. Modern polymer composite materials and their application. Mezhdunarodnyj zhurnal prikladnyh i fundamental'nyh issledovanij, 2018, no. 5-1, pp. 245-256. (In Russ.).
    2. Cherkasov V. D., Rimshin V. I., CHerkasov D. V. The influence of the structure of radiation-protective material on its radiation resistance. Promyshlennoe i grazhdanskoe stroitel'stvo, 2025, no. 1, pp. 42-47. (In Russ.). doi: 10.33622/0869-7019.2025.01.42-47
    3. Bobryshev A. N., Lahno A. V., Kozomazov R. V., Bobryshev A. A. Struktura i svojstva drevesno-napolnennyh kompozitnyh materialov [Structure and properties of wood-filled composite materials]. Penza, PGUAS Publ., 2012. 160 p. (In Russ.).
    4. Cherkasov V. D., Rimshin V. I., CHerkasov D. V., Semenova M. N. Radiation resistance of elastic self-adhesive radiation-protective materials. BST: Byulleten' stroitel'noj tekhniki, 2025, no. 6 (1090), pp. 10-13. (In Russ.).
    5. Rimshin V. I., Cherkasov V. D., Cherkasov D. V., Savin V. K. Self-adhesive elastic radiation protective coatings. Stroitel'nye materialy, 2024, no. 8, pp. 56-62. (In Russ.).
    6. Cherkasov V. D., Rimshin V. I., Harchenko I. Ya., Cherkasov D. V. The effect of the thickness of the radiation protective coating on the frequency of radiation attenuation. Vestnik PGTU, 2024, no. 2, pp. 17-24. (In Russ.).
    7. Murtazina L. I., Gariffullin A. R., Nikul'cev I. A. et al. Non-curing high-filling sealants based on ethylene propylene rubber. Vestnik Kazanskogo tekhnologicheskogo universiteta, 2013, no. 24, pp. 71-73. (In Russ.).
    8. Kononenko A. S., Aleshin V. F., Kolosov A. Yu. et al. Improving the mechanical and operational properties of polymer materials by using fillers. Mezhdunarodnyj nauchnyj zhurnal, 2016, no. 3, pp. 59-66. (In Russ.).
    9. Kiselev V. Ya., Vnukova V. G. Investigation of the effect of the interaction between rubber and filler on the adhesive characteristics of elastomeric compositions. Kauchuk i rezina,1996, no. 3, pp. 25-28. (In Russ.).
    10. Cherkasov V. D., Volockoj A. N., Yurkin Yu. V., Avdonin A. V. The influence of the polarity of fillers on the dynamic properties of vibration-absorbing polymer composite materials based on ethylene vinyl acetate. Regional'naya arhitektura i stroitel'stvo, 2020, no. 1, pp. 52-62. (In Russ.).
    11. Draganyuk O. N., Telegin S. V. Optimization of the ratio of components in the layers of the radiation shield. Proektirovanie i proizvodstvo letatel'nyh apparatov, kosmicheskie issledovaniya i proekty. Reshetnevskie chteniya [Design and manufacture of aircraft, space research and projects. Reshetnev readings]. Krasnoyarsk, 2016, pp. 21-22. (In Russ.).
    12. Yastrebinskij R. N., Samojlova Yu. M., Pavlenko V. I., Demchenko O. V. The use of highly dispersed aluminum oxide for the synthesis of radiation-resistant polymer composites. Uspekhi sovremennogo estestvoznaniya, 2015, no. 9, pp. 532-535. (In Russ.).
    13. Alifanov U. V., Chajkun A. M., Venediktova M. A., Naumov I. S. Features of formulations of rubber based on ethylene propylene rubbers and their use in special-purpose products. Aviacionnye materialy i tekhnologii, 2015, no. 2, pp. 51-55. (In Russ.).
    14. Ochkina N. A. The influence of the type and concentration of filler on the radiation-protective properties of the composite. Obrazovanie i nauka v sovremennom mire. Innovacii, 2018, no. 5(18), pp. 205-211. (In Russ.).
    15. Ochkina N. A. Radiation-protective composite based on alumina cement and optical glass waste. Sovremennye innovacionnye tekhnologii podgotovki inzhenernyh kadrov dlya gorodskoj promyshlennosti i transporta. Sb. tr. [Modern innovative technologies for training engineering personnel for urban industry and transport. Collection of works]. Dnepropetrovsk, 2018, vol. 4, iss. 1, pp. 192-197. (In Russ.).
    16. Pavlenko V. I., Sokolenko I. V. , Noskov A. V. Composite material of a new type for complex radiation protection. Himiya i himicheskaya tekhnologiya, 2015, vol. 6, iss. 58, pp. 66-69. (In Russ.).
    17. Azreen N. M., Raizal S. M. et al. Radiation shielding of ultra-high-perfomance concrete with silica sand, amang and lead glass. Construction and Building Materials, 2018, vol. 172, pp. 370-377.
    18. Abouhaswa A. S., Sayyed M. I. et al. Evaluation of optical and gamma ray shielding features for tungsten-based bismuth borate glasses. Optical Materials, 2020, vol. 106, pp. 1-13.
  • For citation: Cherkasov V. D., Rimshin V. I., Cherkasov D. V. Elastic Self-Adhesive Radiation Protection Materials in Construction. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering], 2026, no. 1, pp. 36-41. (In Russ.). doi: 10.33622/0869-7019.2026.01.36-41

BACK