Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) на платформе Web of Science


  • BUILDING MATERIALS AND PRODUCTS
  • Comparison Of Methods For Determining The Tear Strength Of Double Welded Seams For Logicbase PVC Membranes
  • UDC 699.822:620
    doi: 10.33622/0869-7019.2025.02.70-75
    Alexey V. CYBENKO1, cybenko@tn.ru
    Ilya N. GOGLEV1, goglev@tn.ru
    Svetlana A. LOGINOVA2, sl79066171227@yandex.ru
    Arkadiy A. KRAVCHENKO1, kravchenko.a@tn.ru
    1 TECHNONICOL-Construction Systems, Gilyarovskogo ul., str. 5, Moscow 129110, Russian Federation
    2 Yaroslavl State Technical University (YSTU), Moskovskiy prospekt, 88, Yaroslavl 150001, Russian Federation
    Abstract. The operating conditions of PVC membranes on construction sites in Moscow are considered. The main methods for determining the strength and tightness of double welds for PVC membranes are shown. The double welds of LOGICBASE V-SL PVC membranes have been tested for tear strength in accordance with regulatory documents. The peculiarity of the tests performed is that they were carried out using laboratory and field equipment for the same welds. Strips of PVC membranes selected from welded waterproofing seams at the construction site were used as samples. The laboratory part of the tests was carried out on the basis of the TechnoNICOL laboratory, the field tests were carried out using a portable tensiometer. The results showed that the field method for determining the average tear strength of PVC membrane welds using a portable tensiometer allows us to obtain generally reliable indicators, the error of which relative to trusted laboratory equipment does not exceed 9.44%. Based on these data, it is concluded that the field method of strength determination is sufficiently accurate.
    Keywords: concrete, reinforced concrete, waterproofing, polymer membranes, automatic equipment, welds, tearing
  • REFERENCES
    1. Tarasov I. Yu., Khristoforova I. A. Application of PVC waterproofing membrane in construction. Polimery v stroitel'stve: nauchnyy internet-zhurnal, 2024, no. 1(12), pp. 97-99. (In Russ.).
    2. Dalinchuk V. S., Ilmenderov M. S., Polenov D. V. Repairable waterproofing systems. Stroitel'stvo unikal'nykh zdaniy i sooruzheniy, 2015, no. 7(34), pp. 71-84. (In Russ.).
    3. Chubinishvili A. T. Application of specialized waterproofing membranes in underground construction. Metro i tunneli, 2015, no. 6, pp. 31-33. (In Russ.).
    4. Tsybenko A. V., Shalimov V. N., Goglev I. N., Loginova S. A. Performance of LOGICBASET polymer roll waterproofing material under multiaxial tension. Promyshlennoe i grazhdanskoe stroitel'stvo, 2023, no. 3, pp. 74-79. (In Russ.). doi: 10.33622/0869-7019.2023.03.74-79
    5. Shalimov V. N., Tsybenko A. V., Goglev I. N., Loginova S. A. Chemical resistance and durability of LOGICBASE V-ST polyvinyl chloride membrane. Promyshlennoe i grazhdanskoe stroitel'stvo, 2023, no. 9, pp. 60-67. (In Russ.). doi: 10.33622/0869-7019.2023.09.60-67
    6. Shalimov V. N., Tsybenko A. V., Goglev I. N., Loginova S. A. Study of tightness of single seams of LOGICBASET/ECOBASET PVC membranes in engineering waterproofing systems. Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskie nauki, 2023, vol. 50, no. 4, pp. 203-209. (In Russ.).
    7. Korinteli A. M., Cherunova I. V. Development and study of the structure of the connecting hermetic seam with increased resistance to rupture. Journal of Clothing Science. 2023, no. 8(2), p. 14TLKL223. Available at: https://kostumologiya.ru/PDF/14TLKL223.pdf. (In Russ.).
    8. Klyuev K. A., Kuznetsov A. A. Influence of structural defects and design errors at the stages of construction of a monolithic frame building. StroyMnogo, 2017, no. 1, pp. 6-10. (In Russ.).
    9. Zagorodnikova M. A., Yartsev V. P. Rabotosposobnost' gidroizolyatsionnykh PVKh-membran v konstruktsiyakh razlichnogo naznacheniya [Performance of waterproofing PVC membranes in structures for various purposes]. Tambov, TSTU Publ., 2018. 84 p. (In Russ.).
    10. Kosygina N. N., Kosygina K. A., Belov R. A. Analysis of the causes of failure to protect an embedded structure from groundwater using a practical example. Molodoy uchenyy, 2022, no. 12(407), pp. 41-48. (In Russ.).
    11. Lebedeva I. V. Problems of standardization of reliability of building structures and expert activity in the field of international standardization. Stroitel'naya mekhanika i raschet sooruzheniy, 2022, no. 2(301), pp. 39-46. (In Russ.).
    12. Eremenko D. B. Technical regulations as a source of objective requirements for the materials used. Promyshlennoe i grazhdanskoe stroitel'stvo, 2015, no. 11, pp. 57-62. (In Russ.).
    13. Konovalov N. N. Normirovanie defektov i dostovernost' nerazrushayushchego kontrolya svarnykh soedineniy [Standardization of defects and reliability of non-destructive testing of welded joints]. Moscow, NTC Industrial Safety Publ., 2006. 160 p. (In Russ.).
    14. Zenzina A. N., Kolbina E. L. Evaluation of the strength of welded joints of polymer film materials using secondary raw materials. Dinamika sistem, mekhanizmov i mashin, 2014, no. 3, pp. 69-73. (In Russ.).
    15. Tsybenko A.V. Multiaxial tension of polymer roll waterproofing material. Determination of tensile strength. Fundamenty, 2022, no. 3(9), pp. 55-57. (In Russ.).
    16. Zagorodnikova M. A., Yartsev V. P. Influence of aggressive environments on the physical and mechanical properties of PVC membranes when used in the structures of livestock complexes. Stroitel'nye materialy, oborudovanie, tekhnologii XXI veka, 2016, no. 11-12, pp. 19-22. (In Russ.).
    17. Shalimov V. N., Tsybenko A. V., Goglev I. N., Loginova S. A. Study of chemical resistance of PVC membranes for waterproofing. Stroitel'nye materialy, 2023, no. 10, pp. 63-69. (In Russ.).
    18. Kabardina S. I., Shefer N. I. Izmereniya fizicheskikh velichin [Measurements of physical quantities]. Moscow, BINOM "Knowledge Laboratory" Publ., 2005. 136 p. (In Russ.).
    20. Vedyakov I. I., Eremeev P. G., Soloviev D. V. Scientific and technical support and regulatory requirements for the implementation of projects for buildings and structures of increased responsibility. Promyshlennoe i grazhdanskoe stroitel'stvo, 2018, no. 12, pp. 14-19. (In Russ.).
  • For citation: Cybenko A. V., Goglev I. N., Loginova S. A., Kravchenko A. A. Comparison of methods for determining the tear strength of double welded seams for LOGICBASE PVC membranes. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering], 2025, no. 2, pp. 70-75. (In Russ.). doi: 10.33622/0869-7019.2025.02.70-75

BACK