Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) на платформе Web of Science


  • BUILDING STRUCTURES, BUILDINGS AND FACILITIES
  • Innovative Technologies For The Construction Of Prefabricated Buildings And Structures
  • UDC 691:69.057.124
    doi: 10.33622/0869-7019.2024.08.05-13
    Sergey M. ANPILOV1, anpilovsm@yandex.ru
    Vladimir T. EROFEEV2, erofeevvt@bk.ru
    Vladimir I. RIMSHIN2, v.rimshin@niisf.ru,
    Yuri L. SKOLUBOVICH1, rector@sibstrin.ru
    Andrey N. SOROCHAYKIN3, expert763@mail.ru
    1 Novosibirsk State University of Architecture and Civil Engineering (NGASU), ul. Turgeneva, 159, Novosibirsk 630008, Russian Federation
    2 National Research Moscow State Civil Engineering University, Yaroslavskoye shosse, 26, Moscow 129337, Russian Federation
    3 Institute of Forensic Construction and Technical Expertise (ISSTE), Yuzhnoe shosse, 35-a, of. 401, Tolyatti 445047, Samara region, Russian Federation
    Abstract. The analysis of the current state of the housing stock of the Russian Federation is carried out, which makes it possible to predict its condition, as well as plan the volume of outgoing and incoming housing to ensure the achievement of national development goals. It is shown that the modern construction industry is in need of energy-efficient and environmentally friendly materials with improved physical and mechanical properties for the construction and reconstruction of buildings and structures. Technological approaches to the practical use of local raw materials in combination with innovative metal products made of light steel thin-walled structures in the real sector of the economy are considered. The use of such structures in the construction of objects of various purposes is illustrated by the example of specific objects. Research has been conducted, practical experience has been summarized and recommendations have been prepared on their basis for the practical implementation of solving the problem, in particular, extending the life cycle of capital facilities of early construction (with load-bearing and enclosing structures made of bricks, wooden floors) and industrial construction methods (complete, prefabricated facilities). Suggestions are given for possible use of these solutions in state programs for the restoration and development of new territories of Russia.
    Keywords: local raw materials, building materials, innovative building structures, prefabricated buildings, state development programs
  • REFERENCES
    1. Telichenko V. I. "Green" technologies of the life environment: concepts, terms, standards. Vestnik MGSU, 2017, vol. 12, iss. 4(103), pp. 364-371. (In Russ.).
    2. Kablov E. N. Tendentsii i orientiry innovatsionnogo razvitiya Rossii [Trends and guidelines for the innovative development of Russia]. Moscow, VIAM Publ., 2015. 719 p. (In Russ.).
    3. Strategiya innovatsionnogo razvitiya stroitel'noy otrasli Rossiyskoy Federatsii na period do 2030 g. [Strategy of innovative development of the construction industry of the Russian Federation for the period up to 2030] Minstroy Rossii. Available at: http://www/minstroyrf.ru/docs/11870/ (accessed 11.06.2024). (In Russ.).
    4. Anpilov S. M. Puti progressa i razvitiya v nauke [Ways of progress and development in science]. Tol'yatti, ISSTE Publ., 2021. 186 p. (In Russ.).
    5. Bikbau M. Ya. Nanocement is the basis for effective modernization of precast concrete plants. ZhBI i konstruktsii, 2012, no. 1, pp. 38-42. (In Russ.).
    6. Yarmakovskiy V. N., Kadiev D. Z. Composite low-clinker binders for thermal insulation and structural-thermal insulation lightweight concretes. Izvestiya vuzov. Tekhnologiya tekstil'noy promyshlennosti, 2019, no. 4(381), pp. 66-73. (In Russ.).
    7. Kaprielov S. S., Sheynfel'd A. V., Chilin I. A. et al. Modified concretes: reality and prospects. Vestnik NITS "Stroitel'stvo", 2024, no. 1, pp. 92-104. (In Russ.).
    8. Erofeev V. T., Suraeva E. H., Bogatov A. D. et al. Dry building mixes modified with a biocidal additive. International Journal for Computational Civil and Structural Engineering, 2012, vol. 8, iss. 3, pp. 93-100. (In Russ.).
    9. Bazhenov Yu. M., Fomichev V. T., Erofeev V. T. et al. Theoretical justification for the production of concretes based on electrochemically and electromagnetically activated mixing water. Internet-vestnik VolgGASU. Seriya: Politematicheskaya, 2012, iss. 2(22). Available at: vestnik.vgasu.ru/?source= 4&articleno=939 (accessed 11.06.2024). (In Russ.).
    10. Erofeev V. T., Kruglov V. M., Vatin N. I., Al' Dulaymi Salman Davud Salman. Intelligent composites and their use to produce self-healing concretes. Transportnye sooruzheniya, 2019, vol. 6, no. 4. (In Russ.). doi: 10.15862/12SATS419
    11. Erofeev V. T., El'chishcheva T. F. Humidity conditions of buildings in the presence of hygroscopic salts in the wall material. Izvestiya vuzov. Stroitel'stvo, 2018, no. 12, pp. 62-74. (In Russ.).
    12. Plotnikov V. V. Sovremennye konstruktsionnye, teploizolyatsionnye i otdelochnye materialy dlya sten energoeffektivnykh zdaniy [Modern structural, thermal insulation and finishing materials for walls of energy-efficient buildings]. Bryansk, BGITA Publ., 2023. 168 p. (In Russ.).
    13. Travush V. I., Antoshkin V. D., Erofeev V. T., Gudozhnikov S. S. Design and technological capabilities of prefabricated spherical shells. Stroitel'stvo i rekonstruktsiya, 2013, no. 6(50), pp. 36-48. (In Russ.).
    14. Patent 2818958 RF, MPK E04V5/32. Oblegchennoe perekrytie [Lightweight overlap]. Anpilov S. M., Bondar V. V., Leonovich S. N. et al. Publ. 07.05.2024. (In Russ.).
    15. Patent 2552506 RF, MPK E04B2/86. Sposob vozvedeniya monolitnykh konstruktsiy zdaniy i nes"emnaya universal'naya modul'naya opalubochnaya sistema [A method for the construction of monolithic structures of buildings and a non-removable universal modular formwork system]. Anpilov S. M., Anpilov M. S. Publ. 10.06.2015. (In Russ.).
    16. Anpilov S. M., Rimshin V. I., Eryshev V. A. et al. Non-removable formwork for the construction of monolithic reinforced concrete walls. Opytno-konstruktorskie nauchnye issledovaniya. Tol'yatti, ISSTE Publ., 2021, pp. 7-9. (In Russ.).
    17. Patent 2669635 RF, MPK E04G9/06. Opalubochnyy element stalezhelezobetonnykh perekrytiy [Formwork element of steel-reinforced concrete floors]. Anpilov S. M., Anpilov M. S., Kitaykin A. N. Publ. 12.10.2018. (In Russ.).
    18. Patent 2561127 RF, MPK E04G11/40, E04B5/40. Nesemnaya opalubka monolitnogo perekrytiya [Non-removable formwork of a monolithic floor]. Anpilov S. M., Eryshev V. A., Anpilov M. S. et al. Publ. 20.08.2015. (In Russ.).
    19. Telichenko V. I. Innovations in construction - everything is ahead. Promyshlennoe i grazhdanskoe stroitel'stvo, 2013, no. 7, pp. 88-92. (In Russ.).
    20. Nefedov G. V. Construction of medium-rise houses made of light steel structures. Promyshlennoe i grazhdanskoe stroitel'stvo, 2020, no. 7, pp. 10-15. (In Russ.).
    21. Anpilov S. M., Eryshev V. A., Murashkin G. V., Sorochaykin A. N. Primenenie normativno-tekhnicheskikh dokumentov pri proektirovanii i stroitel'stve zdaniy i sooruzheniy s ispol'zovaniem LSTK i nastila armiruyushchego "BIZON" [Application of normative and technical documents in the design and construction of buildings and structures using LSTC and BISON reinforcing flooring]. Tol'yatti, ISSTE Publ., 2021. 82 p. (In Russ.).
    22. Anpilov S. M., Mikhaylov A. V., Sorochaykin A. N. Construction control as a legal means to ensure proper execution of contract works. Ekspert: teoriya i praktika, 2021, no. 2(11), pp. 77-91. (In Russ.). doi: 10.33622/0869-7019.2020.07.10-15
  • For citation: Anpilov S. M., Erofeev V. T., Rimshin V. I., Skolubovich Yu. L., Sorochaykin A. N. Innovative Technologies for the Construction of Prefabricated Buildings and Structures. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering], 2024, no. 8, pp. 5-13. (In Russ.). doi: 10.33622/0869-7019.2024.08.05-13

BACK