Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) на платформе Web of Science


  • BUILDING STRUCTURES, BUILDINGS AND FACILITIES
  • Comparison Of Methods For Connecting Profiled Steel Sheets With A Wooden Frame
  • UDC 624.011.6
    doi: 10.33622/0869-7019.2024.01.36-43
    Viktor I. ZHADANOV, organ-2003@bk.ru
    Igor V. RUDNEV, ru403@mail.ru
    Valentina A. PERESYPKINA, valya.peresypkina@bk.ru
    Orenburg State University, prospekt Pobedy, 13, Orenburg 460018, Russian Federation
    Abstract. Solving the problem of reducing material consumption and increasing the technical and economic efficiency of building structures is an urgent task in modern construction. It is possible to achieve significant results in this direction, through the use of structures made of multi-modular materials, as well as through the development of construction elements that combine bearing and enclosing functions. A characteristic example of such structures are slabs, beams, various spatial systems combining a wooden frame and a profiled steel sheet. At the same time, in order to increase the efficiency of their joint work, it is necessary to use the connecting elements that differ in the least malleability. To assess the compliance of various methods of joining profiled steel sheets with a wooden frame, a series of experiments were carried out with the use of various types of nails and screws as connecting links. It is shown that traditional methods of connection have significant flexibility under the action of design loads. In this regard, a new type of connection of the considered elements is proposed using T-shaped metal plates and self-tapping screws glued into an array of wood. The effectiveness of the proposed method of connecting steel profiled sheets with a wooden frame has been experimentally proven.
    Keywords: profiled steel sheet, wooden frame, connecting element, construction of multi-modular materials, T-shaped metal plate, design load, deformability
  • REFERENCES
    1. Abovskij N. P., Endzhievskij L. V., Deordiev S. V., Palagushkin V. I. Formoobra-zovanie stroitel'nyh konstrukcij [Shaping of building structures]. Krasnoyarsk, SFU Publ., 2013. 184 p. (In Russ.).
    2. Deordiev S. V., Belichenko M. Yu., Krasiev M. A., Butenko M. V. Experimental study of the stress-strain state of a wood-metal structural coating and its nodal connections under the action of a static load. Vestnik TGASU, 2021, no. 23(3), pp. 118-128. (In Russ.).
    3. Pyatikrestovskij K. P. Issues of further improvement of structures using wood and new slab materials. Prostranstvennye konstrukcii, 2007, no. 9, pp. 49-51. (In Russ.).
    4. Kibireva Yu. A., Astaf'eva N. S. Application of structures made of steel-reinforced concrete. Ekologiya i stroitel'stvo, 2018, no. 2, pp. 27-34. (In Russ.).
    5. Stoyanov V. V. Sovremennye stroitel'nye konstrukcii iz metalla, dereva i plastmass [Modern building structures made of metal, wood and plastics]. Odessa, Vneshreklaservis Publ., 2007. 74 p. (In Russ.).
    6. Aktuganov A. A., Kuznecov I. L., Aktuganov A. N. Metal-wood thin-walled beam. Aktual'nye problemy stroitel'nogo i dorozhnogo kompleksov. Sb. nauch. st. [Current problems of construction and road complexes. Collection of scientific articles]. Joshkar-Ola, MarGTU Publ., 2009, pp. 29-31. (In Russ.).
    7. Kuznecov I. L., Aktuganov A. A., Trofimov A. P. Development and research of a metal-wood I-beam. Izvestiya KazGASU, 2010, no. 1(13), pp. 117-121. (In Russ.).
    8. Dmitriev P. A., Inzhutov I. S., Strizhakov Yu. D. Spatial combined block farms based on wood for building coverings. Izvestiya vuzov. Stroitel'stvo i arhitektura, 1987, no. 11, pp. 22-27. (In Russ.).
    9. Kuznecov I. L., Aktuganov A. A., Aktuganov A. N., Kotlov V. G. Development and research of a metal-wood I-beam with cylindrical stiffeners reinforced with additional fasteners. Privolzhskij nauchnyj zhurnal, 2012, no. 4, pp. 47-54. (In Russ.).
    10. Kalinin S. V., Zhadanov V. I. Experimental studies of wood-metal beams with a wall made of steel profiled sheet with transverse bending. Vestnik TGASU, 2012, no. 3, pp. 117-125. (In Russ.).
    11. Maryshev A. Yu. Two-layer arched structure with belts made of profiled sheets. Materialy regional'noj nauch.- tekhn. konf. [Materials of the regional scientific and technical conference]. Krasnoyarsk, KrasGASA Publ., 1999, pp. 8-10. (In Russ.).
    12. Grigor'ev S. V. Analysis of constructive solutions of coatings using milled sheet. Prostranstvennye konstrukcii v Krasnoyarskom krae [Spatial structures in the Krasnoyarsk region]. Krasnoyarsk, 1990, pp. 136-141. (In Russ).
    13. Dmitriev P. P. Investigation of the work of a plate on a wooden frame with a sheathing of profiled steel flooring with transverse bending. Promyshlennoe i grazhdanskoe stroitel'stvo, 1993, no. 2, pp. 6-9. (In Russ.).
    14. Kolesnikova M. A. Experimental studies of a metal-wood block of a shallow arch. Vestnik KrasGASA, 2003, no. 6, pp. 248-253. (In Russ.).
    15. Endzhievskij L. V., Inzhutov I. S., Dmitriev P. A. Kombinirovannye iz stali, betona, dereva prostranstvennye konstrukcii blochnogo tipa [Combined block-type spatial structures made of steel, concrete, wood]. Krasnoyarsk, SFU Publ., 2008. 331 p. (In Russ.).
    16. Kalinin S. V., Zhadanov V. I., Tisevich E. V. Combined ribbed plates and panels based on wood for prefabricated buildings and structures. Sovremennye stroitel'nye konstrukcii iz metalla i drevesiny. sb. nauch. tr. [Modern building structures made of metal and wood: A collection of scientific papers]. Odessa, 2006, pp. 79-88. (In Russ.).
    17. Rudnev I. V., Zhadanov V. I., Lisickij I. I. Vosstanovlenie elementov dere-vyannyh konstrukcij zdanij i sooruzhenij kul'turnogo naslediya vkleennymi stal'nymi plastinami [Restoration of elements of wooden structures of buildings and cultural heritage structures with glued steel plates]. Orenburg, OGU Publ., 2018. 144 p. (In Russ.).
    18. Lisickij I. I., Yarichevskij I. I., Zhadanov V. I. Wooden trusses with nodal joints on steel glued plates. Promyshlennoe i grazhdanskoe stroitel'stvo, 2018, no. 11, pp. 9-14. (In Russ.).
    19. Rudnev I. V., Zhadanov V. I., Lisov S. V. Connections of elements of wooden structures using glued steel plates. Izvestiya vuzov. Stroitel'stvo, 2014, no. 4, pp. 5-12. (In Russ.).
    20. Dmitriev P. P. Work on shifting fasteners of steel profiled flooring to elements of wooden structures. Izvestiya vuzov. Stroitel'stvo, 1992, no. 9,10, pp. 13-15. (In Russ.).
    21. Biryulev V. V., Bobrov V. A., Esik G. V. Work of fastenings of profiled flooring on cyclic shear forces. Izvestiya vuzov. Stroitel'stvo, 1993, no. 2, pp. 10-15. (In Russ.).
  • For citation: Zhadanov V. I., Rudnev I. V., Peresypkina V. A. Comparison of Methods for Connecting Profiled Steel Sheets With a Wooden Frame. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering], 2024, no. 1, pp. 36-43. (In Russ.). doi: 10.33622/0869-7019.2024.01.36-43

BACK