Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) на платформе Web of Science


  • DEPARTMENT "TESTING STRUCTURES" of NRU MGSU - 60 YEARS
  • Bayesian Approach For Determining The Strength Of Concrete Taking Into Account A Priori Information
  • UDC 691.328
    doi: 10.33622/0869-7019.2023.03.68-73
    Valery A. DORF1, dorfva@ioes.ru
    Dmitry N. KOROTKIKH1,2, korotkihdn@ioes.ru
    Dmitrii E. KAPUSTIN2, kde90@bk.ru
    1 Institute "Orgenergostroy", Derbenevskaya nab., 7, str. 10, Moscow 115114, Russian Federation
    2 Moscow State University of Civil Engineering (National Research University), Yaroslavskoe shosse, 26, Moscow 129337, Russian Federation
    Abtract. The analysis of known approaches to determining the strength of concrete during the inspection of building structures is presented from the point of view of optimizing the volume of measurements performed and the reliability of the results obtained. It is shown that the use of only one of the methods of non-destructive testing - elastic rebound, shock pulse or ultrasound with the use of calibration dependence does not always provide a reliable determination of strength. The use of the two mentioned control methods simultaneously reduces the error in determining the strength of concrete. It is established that the most effective is the use of Bayesian approach for complex determination of concrete strength, taking into account a priori information, in particular, about the composition of concrete, its density, technology of concrete works, as well as the results of previous surveys. This approach makes it possible to increase the accuracy and reliability of determining the strength of concrete, and in the case of a survey of structures of decommissioned nuclear power plants, by reducing the number of measurements, it is possible to reduce the dose burden on the personnel conducting the survey.
    Keywords: Bayesian approach, concrete strength, non-destructive testing methods, a priori information, elastic rebound method, shock pulse method
  • REFERENCES
    1. Rimshin V. I., Ketsko E. S., Kuzina I. S. Methods for determining the strength of materials in building structures of water treatment facilities. Universitetskaya nauka, 2020, no.1(9), pp. 29-32. (In Russ.).
    2. Abrashitov V. S., Kapustin D. E., Kapustin A. E. Statistical approach to determining the number of measurements during the instrumental survey of building structures. Inzhenernyy vestnik Dona, 2021, no. 7. Available at: http://www.ivdon.ru/ru/magazine/archive/n7y2021/7101 (accessed 25.02.2023). (In Russ.)
    3. Gorbunov I. A., Kapustin D. E. Calculated resistance of concrete and steel fiber concrete in a probabilistic interpretation. Vestnik BGTU im. V. G. Shukhova, 2019, pp. 58-63. (In Russ.). doi: 10.12737/article_5c5062099aebc6.33938586
    4. Ali-Benyahia K., Sbartai Z.-M., Breysse D., Ghrici M., Kenai S. Improvement of nondestructive assessment of on-site concrete strength: Influence of the selection process of cores location on the assessment quality for single and combined NDT techniques [Совершенствование методов неразрушающей оценки прочности бетона на объекте: влияние процесса выбора местоположения стержней на качество оценки для одиночных и комбинированных методов неразрушающего контроля]. Construction Building Materials, 2019, no. 195, pp. 613-622. doi: 10.1016/j.conbuildmat.2018.10.032
    5. Ahsan R., Aziz I., Aziz S., Sarker M. S. K. Reliable measurement of in situ concrete strength and implikations in building safety assessment [Надежное измерение прочности бетона на месте и влияние ее на оценку безопасности здания]. Conference Safety in The Garment Industry, Five Years After Rana Plaza, Dhaka, April 30, 2018. Pp. 48-56.
    6. Faroz S. A., Ghosh S., Faroz A. M. Tri-level framework for realistic estimation of concrete strength using bayesian data fusion of UPV and guided coring [Трехуровневая структура для оценки прочности бетона с использованием байесовского объединения данных UPV и контрольного керна]. Journal of Nondestructive Evaluation, 2022, no. 41(4), doi: 10.1007/s10921-022-00909-7
    7. Lee T., Lee J., Choi H. Assessment of strength development at hardened stage on high-strength concrete using NDT [Оценка набора прочности высокопрочного бетона на стадии затвердевания с использованием неразрушающего контроля]. Applied Sciences, 2020, no. 10, p. 6261. doi: 10.3390/app10186261
    8. Chingгlatг C., Budescu M., Lupгєteanu R., Lupгєteanu V., Scutaru M.-C. Assessment of the concrete compressive strength using non-destructive methods [Оценка прочности бетона при сжатии неразрушающими методами]. Universitatea Tehnicг "Gheorghe Asachi" DIN Iaєi, 2017, vol. 63(67), no. 2, pp. 43-56.
    9. Alwash M. F. A. Assessment of concrete strength in existing structures using nondestructive tests and cores: analysis of current methodology and recommendations for more reliable assessment [Оценка прочности бетона в конструкциях с использованием неразрушающих испытаний и стержней: анализ методологии и рекомендации для более надежной оценки]. Universitй de Bordeaux, France, 2017. 208 p.
    10. Leshhinskiy M. Ju. Ispytanie betona [Concrete testing]. Moscow, Stroyizdat Publ., 1980. 360 p. (In Russ.).
    11. IAEA Guidebook on non-destructive testing of concrete structures [Руководство по неразрушающему контролю бетонных конструкций]. Vienna, 2002. 242 p.
    12. Abdullah B. I., Abdulkadir M. R. Correlation between destructive and non tests results for concrete compressive strength [Соотношение результатов разрушающих и неразрушающих испытаний прочности бетона на сжатие]. Journal of Zankoi Sulaimani, 2016, vol. 18, no. 4, pp. 119-132.
    13. Mulik Nikhil V., Balki Minal R. et al.The use of combined non destructive testing in the concrete strength assessment from laboratory specimens and existing buildings [Применение комбинированного неразрушающего контроля при оценке прочности бетона по лабораторным образцам и существующим зданиям]. International Journal of Current Engineering and Scientific Research, 2015, vol. 2, iss. 5, pp. 55-59.
    14. Shariati M., Ramli-Sulong N. H. et al. Assessing the strength of reinforced concrete structures through ultrasonic pulse velocity and schmidt rebound hammer tests [Оценка прочности железобетонных конструкций с помощью ультразвуковых испытаний на скорость импульса и отскока молота Шмидта]. Scientific Research and Essays, 2011, vol. 6(1), pp. 213-220.
    15. Kheder G. F. A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing [Двухэтапная методика оценки прочности монолитного бетона с использованием комбинированного неразрушающего контроля]. Materials and Structures, 1999, vol. 32, pp. 410-417.
    16. Breysse D., Balayssac J. P., Biondi S. et al. Non destructive assessment of in situ concrete strength: comparison of approaches through an international benchmark [Неразрушающая оценка прочности бетона на месте: сравнение подходов с помощью международного эталона]. Materials and Structures, 2017, no. 50(133), pp. 2-17. doi: 10.1617/s11527-017-1009-7
    17. Hal'd A. Matematicheskaya statistika s tehnicheskimi prilozheniyami [Mathematical statistics with technical applications]. Moscow, Inostrannaya literatura Publ., 1956. 664 p. (In Russ.)
    18. Zoubir-Mehdi S., Alwash M. F. A. et al. Combining the bi-objective approach and conditional coring for a reliable estimation of on-site concrete strength variability [Сочетание двухуровнего подхода и условного керна для надежной оценки изменчивости прочности бетона]. Materials and Structures, 2021, no. 54(230). doi: 10.1617/s11527-021-01820-9
    19. Interlandi C., Stucchi F. R., Martha L. F. C. R., Santos S. H. C. Revision of Brazilian norm ABNT NBR 12655:2015. Evaluation of concrete resistances: an alternative to the criteria of Brazilian standard NBR 12655 based on a Bayesian approach [Пересмотр бразильского норматива ABNT NBR 12655:2015. Оценка сопротивления бетона: альтернатива критериям бразильского стандарта NBR 12655 на основе байесовского подхода]. Revista IBRACON Estruturas Materials, 2020,vol. 13, no. 4, pp. 13411. doi: 10.1590/S1983-41952020000400011
    20. Bazhenov Ju. M. Tehnologiya betona [Concrete technology]. Moscow, ASV Publ., 2002. 500 p. (In Russ.).
  • For citation: Dorf V. A., Korotkikh D. N., Kapustin D. E. Bayesian Approach for Determining the Strength of Concrete Taking Into Account a Priori Information. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering], 2023, no. 3, рp. 68-73. (In Russ.). doi: 10.33622/0869-7019.2023.03.68-73

BACK