BACK
- BUILDING STRUCTURES, BUILDINGS AND FACILITIES
- Bearing Capacity of Centrally Compressed Reinforced Concrete Elements Corrosion-Damaged as a Result of Fire Exposure
- UDC 624.012.4-183.2 DOI: 10.33622/0869-7019.2019.06.35-39
Evgeny À. ARTEMYEV, e-mail: e.artemiev@ktbbeton.com
Design-Technological Bureau of Concrete and Reinforced Concrete (JSC "KTB RC"), 2nd Institutskayaul., 6, str. 15A, 109428 Moscow, Russian Federation
Abstract. Determination of the bearing capacity of the elements damaged as a result of fire effect depends on the accuracy of the thermo-technical calculation. After this calculation, the distribution of the temperature field over the cross section of the element and the strength characteristics depending on it are determined. The temperature distribution over the cross section of the element depends on such parameters as heat capacity and thermal conductivity of parts of the section, the spatial position of the structure, its humidity. As part of this work, heat engineering calculations of the cross section of the reinforced concrete column were performed with various options of the cross section - with and without a protective layer, taking into account the thermal performance of all cross section components (reinforcement, concrete and corrosion) and excluding corrosion and reinforcement. Based on the obtained temperature fields, the bearing capacity and its percentage ratio were calculated. The main conclusion is that the bearing capacity of the centrally compressed corrosion-damaged elements is significantly influenced by the factor of separation of the protective layer of concrete, as well as thermal-technical characteristics of materials.
Key words: temperature heating, compressed reinforced concrete elements, thermal-technical performance, corrosion. - REFERENCES
1. STO 36554501-006-2006. Pravila po obespecheniyu ognestojkosti i ognesohrannosti zhelezobetonnyh konstrukcij [Rules for fire resistance and fire safety of reinforced concrete structures]. Moscow, 2006. 78 p. (In Russian).
2. MDS 21-2.2000. Metodicheskie rekomendatsii po raschetu ognestoykosti i ognesokhrannosti zhelezobetonnykh konstruktsiy [Guidelines for the calculation of fire resistance and fire safety of reinforced concrete structures]. Moscow, 2000. 122 p. (In Russian).
3. Rekomendatsii po raschetu predelov ognestoykosti betonnykh i zhelezobetonnykh konstruktsiy [Recommendations for the calculation of fire resistance limits of concrete and reinforced concrete structures] / NIIZhB. Moscow, Stroyizdat Publ., 1986. 40 p. (In Russian).
4. Rekomendatsii po primeneniyu ognezashchitnykh pokrytiy dlya metallicheskikh konstruktsiy [Recommendations for the use of fire-retardant coatings for metal structures]. Moscow, Stroyizdat Publ., 1984. 40 p. (In Russian).
5. Granik Ju. G. The Problem of fire safety of tall buldngs. Proc. of the international conference "Integrated passive fire protection of high-rise and mixed-use buildings" (June 26, 2006). Moscow, 231 p. (In Russian).
6. Kuznetsova I. S., Ryabchenkova V. G. Fire regulations are the basis of fire safety of buildings and structures. Promyslennoe i grazhdanskoe stroitel'stvo, 2017, no. 1, pp. 35-38. (In Russian).
7. Milovanov A. F., Solomonov V. V., Kuznecova I. S. Fire-resistance of buildings and structures. Promyshlennoe i grazhdanskoe stroitel'stvo, 2002, no. 9, pp. 39-40. (In Russian).
8. Milovanov A. F. Stojkost' zhelezobetonnyh konstrukcij pri pozhare [Durability of reinforced concrete structures in case of fire). Moscow, Strojizdat Publ., 1998. 296 p. (In Russian).
9. Solomonov V. V., Milovanov A. F., Kuznecova I. S. High rise buildings: security problems. Stroitefnyj ekspert, 2006, no. 21(232). (In Russian).
10. Soskov A. A., Pronin D. G. Fire protection of steel structures. Promyslennoe i grazhdanskoe stroitel'stvo, 2015, no. 7, pp. 57-59. (In Russian). - For citation: Artemyev E. À. Bearing Capacity of Centrally Compressed Reinforced Concrete Elements Corrosion-Damaged as a Result of Fire Exposure. Promyslennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering], 2019, no. 6, pp. 35-39. DOI: 10.33622/0869-7019.2019.06.35-39.
BACK

